A new Heidelberg cylinder press

7 May 2011

Delivery of our new Heidelberg cylinderAt the end of February we wrote that we were having the cylinder of our Heidelberg SB renovated. We were premature. The engineer did come, and a series of height measurements showed that the cylinder was too worn to be worth repairing. It would have to be replaced. We talked to a couple of specialist engineers, and the offer we liked best was for a thorough inspection of our present machine to see if it was worth spending more on it. So, at the beginning of March, Mark came down from Senior Graphics. He told us about broken pinion teeth and worn compression screws. Even more expensive, and if the work was done there were still other things that could go wrong. The bullet was bitten, and we ordered  a fully refurbished, part-exchange replacement.

Yesterday was the big day, and our picture shows Mike from Seniors guiding the new machine through the doorway. Clicking on the picture will take you to our Flickr album of the old press being taken out and the new one coming in.

We’re particularly pleased that we’ve got a press that was previously used by Gwasg Gregynog. We are assured that it was in beautiful condition when Mike took it out, and he has stripped it right down, replaced what was worn and fitted new electrics. It looks, and smells, like a new machine.

Swapping the machines over only took a couple of hours, but then the guards and tables that had been taken off for transit had to be put back on, and the lovely new set of rollers put in. It’s a fiddly job, and probably the longest single part of the whole operation. We were finally ready for a test print in the middle of the afternoon.

Was it all worth it? The test printing was very promising. We used a forme that had already been printed on the old press, and we got to a point where it was looking very good without a single piece of make ready. We had previously spent the best part of two hours making it ready. We ran twenty or thirty sheets through twice, and the register was so good that the two printings couldn’t be seen under a magnifying glass. Running a few jobs over the next few days will tell us whether it’s living up to our high expectations.


Advertisements

One Response to “A new Heidelberg cylinder press”


  1. […] An account from Hand & Eye of the install­a­tion of their latest press. […]


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: